Insignia IS-DA1802 Instruction Manual

Insignia IS-DA1802 Instruction Manual

5-disc cd changer player

Advertisement

IS-DA1802
5-DISC CD CHANGER PLAYER
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Insignia IS-DA1802

  • Page 1 IS-DA1802 5-DISC CD CHANGER PLAYER INSTRUCTION MANUAL...
  • Page 2 WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The ventillation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Page 4: Location Of Controls And Indicators

    LOCATION OF CONTROLS AND INDICATORS Remote Control 1. Open / Close Button 2. No. 1 Disc Button 3. No. 5 Disc Button 4. Disc Skip Button 5. +10 Button 6. Mode/Prog Button 7. Sleep Button 8. Stop Button 9. Play/Pause Button 10.
  • Page 5: Compact Disc Operation

    COMPACT DISC OPERATION CONCERNING COMPACT DISC 1. Usable compact discs bear the mark shown here: 2. Notes on handling discs: Press the claws at the center of the case Lift out without touching the recorded surface • Do not touch the rainbow color/reflective recorded surface. •...
  • Page 6 WARNING: Do not move or tilt the CD player when there are discs in the tray. Discs can slip out of place and jam the tray mechanism, or damage the optical assembly. Do not turn the disc tray manually by hand when the tray opens or discs may jam. When the CD door opens for disc adding/replacement, one CD slot will be fully expposed.
  • Page 7: Random Function

    RANDOM FUNCTION To play tracks on all discs in a random order, press the MODE/PROG button four times. To play tracks on one disc in a random order, press the MODE/PROG button five times. INTRO FUNCTION When the unit is set to the Intro function, the first ten seconds of all tracks are played in turn. When the end of a disc's play list is reached, the system will attempt to scan tracks on the next disc in the carousel.
  • Page 8: Playback Information

    PLAYBACK INFORMATION General Supports: MP3 and WMA up to 999 tracks per CD. 32-320kbps MP3 and 64 - 160kbps WMA at 44kHz Recommended burning speed on blank disc: normal 4X, max 8X. Playability of MP3 and WMA songs on CDR and CDRW discs may be affected by the quality of disc media, burning program/settings, type of CD writer ...

Table of Contents