Table of Contents
Advertisement
OPERATION
LOUDNESS
Press BND/LOU button (13) for
several seconds to reinforce the bass
output and display will show "LOUD".
Press it for several seconds again to
release this function.
SET THE CLOCK
Press and hold down the DISP
button (15) until the clock is shown
on the display and flashes. Then
press the MANU/SKIP
(16) to change minutes or
MANU/SKIP
change hours.
SELECT MODE
Press MODE button (6) to choose
desired listening mode. (e.g. radio
mode to cassette mode to CDC
mode to AUX IN mode.)
CD source can be input from the
CDC socket (back of the unit).
MUTE
Press MUT button (3) to mute down
the sound instantly. If any button
(except OPEN button (7) and
EJECT button (4)) is pressed in
mute state, the mute mode is
released.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and
activated functions on the display (8).
EQUALIZATION
Press EQ button (19) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
→DSP OFF→FLAT→CLASSICS→POP M→ROCK M
button
button (17) to
REMOTE SENSOR (OPTIONAL)
Point the remote control handset to
the remote sensor IR (26). Press the
function keys on the handset to
control the system.
AUXILIARY INPUT
The unit can be connected to a
portable audio player through the
AUX IN jack (2)
FLASHING LED
If the front panel does not install in
the main unit, the LED (11) will be
flashing.
RESET
Reset button (12) must be activated
with either a ballpoint pen or thin
metal object. The reset button is to be
activated for the following reasons:
- Initial installation of the unit when
all wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Note: If press reset button (12), the
unit can't work yet, please use a
cotton swab soaked in isopropyl
alcohol to clean the socket on the
front panel.
9
Advertisement
Table of Contents
