Table of Contents
Advertisement
MAINTENANCE
For System
The following suggestions help you care
for the product so that you can enjoy it for
years.
1. Keep the product dry. If it does get wet,
wipe it dry immediately. Liquids might
contain minerals that can corrode the
electronic circuits.
2. Keep the product away from dust and
dirt, which can cause premature wear of
parts.
3. Handle the product gently and carefully.
Dropping it can damage circuit boards
and cases, and can cause the product
to work improperly.
4. Wipe the product with a dampened
cloth occasionally to keep it looking new.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the product.
5. Use and store the product only in
normal temperature environments. High
temperature can shorten the life of
electronic devices, damage batteries,
and distort or melt plastic parts.
For Tape Player
Periodic cleaning of the tape head and
capstan shaft will ensure good
reproduction of music and trouble-free
operation. Cleaning of the tape head
should be done every 20 to 30 hours of
operation or when the high tones have
become less clear.
1. Use a cassette-cleaning cartridge if
available. If one is not available, use a
cotton
swab
rubbing alcohol.
2. While holding the tape door open,
locate tape head to the right of the
opening and in the centre of the unit.
3. Clean the tape head with the cotton
swab.
soaked
in
isopropyl
4. Clean the capstans and the pinch
rollers with the cotton swab.
5. Allow the tape head, capstans and
pinch rollers to dry before operating.
6. Do not touch the tape with your fingers,
if it becomes lose, wind it back by
twisting a six-sided pencil in the
cassette reel.
14
Advertisement
Table of Contents
