Download Print this page

Hanover ISLAEGG-BRN Assembly Instructions Manual

Steel/wicker egg swing chair

Advertisement

Quick Links

GCS09101A
Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
from where you purchased the product.
1-866-988-3300
Please call our Toll-Free Customer Service Hotline at:
Between 8:00 AM and 5:00 PM PST, Monday through Friday
To expedite any future warranty claims, please retain the instruction sheet, warranty card
and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful to never allow water to build up in the frames as this will
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a
liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes cushions,
slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean
water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or
damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer
to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the
warranty.
6/1/2015 (a)
7

Advertisement

loading

Summary of Contents for Hanover ISLAEGG-BRN

  • Page 1 GCS09101A Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. 1-866-988-3300 Please call our Toll-Free Customer Service Hotline at: Between 8:00 AM and 5:00 PM PST, Monday through Friday To expedite any future warranty claims, please retain the instruction sheet, warranty card and receipt for future use.
  • Page 2 GCS09101A Outdoor Furniture 1-Year Limited Warranty Program For a period of one (1) year after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
  • Page 3 Assembly Instructions GCS09101A Steel/Wicker Egg Swing Chair Weight Limit: 250 lbs Questions, problems, or missing parts? Before returning to the store, call Customer Service. 866-988-3300 8 a.m. -5 p.m., PST Monday - Friday Retain this manual for future use.
  • Page 4 GCS09101A Table Parts & Tools PART PICTURE & DESCRIPTION PART PICTURE & DESCRIPTION M8 *60mm bolt with Base part 1 washer& nut M8*30mm bolt with Base part 2 washer& nut Base part 3 M8*25mm bolt with washer& nut M8*20mm bolt with washer Upright pole Bent tube M6*40mm bolt with...
  • Page 5 GCS09101A Wrench WARNING: To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
  • Page 6 GCS09101A Table Assembly Step 1:  Connect the base part 1(A) and base part 2(B) with M8*25mm bolt with washer& nut (CC). Step 2:  Insert the base part 3 (C) into base part 1(A) and base part 2(B), tighten with M6*15mm bolt with washer (FF).
  • Page 7 GCS09101A Step 3:  Attach the upright pole (D) to the base with M8*20mm bolt with washer (DD) and M8*30mm bolt with washer & nut (BB) as shown. Step 4:  Insert upright pole (D) into bent tube (E). Tighten with M8 *60mm bolt with washer&...
  • Page 8 GCS09101A Step 5:  Connect the basket 1(F) and basket 2(G) with M6*40mm bolt with washer& nut (EE).  Roll to insert the silencing buckle into the ring as shown. Step 6:  Connect the basket and the bent tube (E) with hook (GG).
  • Page 9 GCS09101A Step 7:  Attach the band to the base, tighten all the bolts and make sure it is stable.  Assembly is completed.