Page 14
NOTES BEFORE USE Thank you for purchasing Kabuto helmet. Before using, please make sure that there is no scratch, no crack both on the external surface and in the internal components of the helmet. Please also make sure that all the components are in the package. This manual explains how to use your Kabuto helmet correctly.
Page 15
●Before riding a bicycle, make sure to adjust the helmet so it fits your head correctly. The strap should be positioned not to cover the ears, the buckle positioned away from your jawbone, and the strap and buckle adjusted to be both comfortable and secure. ●Please handle the helmet with care.
Page 16
Wearing Helmet Properly Wear the helmet from the front to the rear horizontally. Make sure to put the front side of the helmet on just above your eyebrows (Please see a mirror to check). It is necessary to adjust the length of the chinstrap and Adjustment-lock. Please make sure to read and follow the instruction before use.
Part Names and Table of Contents NOTES BEFORE USE Front WARNING Liner Wearing Helmet Properly Part Names and Table of Contents Shell Chinstraps Fastening the Strap Buckle Adjusting the Chinstrap Adjusting the Adjustment-locks Visor Adjuster Adjusting the Adjuster Adjustment-lock Linings /Visors Chinstrap Replacing the Inner Pad Detach/Attach the Visor...
Chinstraps Chinstraps play an important role under an accident, preventing the helmet from coming off. In order to maintain the original performance of the helmet, make sure to adjust "Chinstraps length" and "Adjustment-locks positions" properly and fasten "Strap buckle" correctly. Fastening the Strap Buckle Strap buckle is the retention system at the end of both chinstraps.
WARNING •It is very dangerous if the chinstrap is not inserted into the strap buckles the way as illustrated. It can be slipped out when subjected to a strong pressure such as fall, and the helmet may come off. Make sure to insert the chinstraps into the buckles properly as the illustration.
Adjuster "Adjuster" is the mechanism at the rear of the helmet to keep the helmet from moving. Adjust the Adjuster so it will keep the helmet on your head securely. Adjusting the Adjuster Hold the front side of the helmet and tighten the Adjuster using the adjuster dial.
Linings / Visors Replacing the Inner Pad Detach/Attach the Visor This item is removable as necessary. Front pad Attaching the Visor Visor Stick the Inner pad Remove the Front pad on the hook-and-loop and replace it with the fasteners properly. visor firmly in position.
Continuing to use worn linings may lead them to break and cause poor fit. Old linings should be replaced at an early stage. [ CS-1 Replacement Parts ] •Inner Pad •Visors •Adjuster Please refer to Parts List on our website for more information about replacement.