Download Print this page

JetStor JX JBOD Series Quick Installation Manual

Advertisement

Quick Links

This QIG will get you up and running quickly and is applicable to the following models:
1
BEFORE YOU BEGIN
Package Contents
A JetStor JX JBOD model includes:
- System chassis (x1)
- Disk drive trays: (x24 LFF1) for 4U 24-bay; (x16 LFF) for 3U 16-bay;
(x12 LFF) for 2U 12-bay; (x26 SFF2) for 2U 26-bay
- AC power cords (x2)
- SAS 12G expansion cable (x2) for dual controller model; (x1) for
single controller model
- RS-232 console cable (x2) for dual controller model; (x1) for single
controller model
- Screws pack for disk drives
- This quick installation guide
Optional accessories:
- Rail kit (model name: SLR-RM3640)
- SAS 12G expansion cable with Wake-on-SAS (model name:
CBL-12SW150)
JetStor JX JBOD Series
Quick Installation Guide
Thank you for purchasing a JetStor JBOD storage system.
824JX, 824JXD, 816JX, 816JXD, 812JX, 812JXD, 826JXD.
More Information
For additional hardware manual, software manual, or compatibility
matrix which includes HDD, SSD, and HBA requirements, please
refer to the JetStor download center at
support
1
LFF : Large Form Factor / 3.5" disk drive
2
SFF : Small Form Factor / 2.5" disk drive
http://www.acnc.com/

Advertisement

loading

Summary of Contents for JetStor JX JBOD Series

  • Page 1 JetStor JX JBOD Series Quick Installation Guide Thank you for purchasing a JetStor JBOD storage system. This QIG will get you up and running quickly and is applicable to the following models: 824JX, 824JXD, 816JX, 816JXD, 812JX, 812JXD, 826JXD. BEFORE YOU BEGIN...
  • Page 2 INSTALL THE DISK DRIVES Unlock the Disk Drive Tray - The standard position of the disk drive tray is locked to prevent damage during transport. - To unlock LFF or SFF disk drive tray: shift the release button lock from left to right. Unlock Direction Release Button Lock Unlock Direction...
  • Page 3 INSTALL THE OPTIONAL RAIL KIT The rail kit is an optional accessory for JetStor JX JBOD series product. If you have ordered the rail kit, Please follow the racking instructions below. Pull the inner rail out and slide the intermediate member back.
  • Page 4 ©2017 Advanced Computer & Network Corp. All rights reserved. No part of this document may be reproduced or re-purposed without the express written consent of AC&NC. JetStor X JBOD, JetStor X Series, and the JetStor logo are trademarks of AC&NC. All other trademarks are the property of their respective owners. Features, specifications, model numbers, and product appearance is subject to change without notice.

This manual is also suitable for:

824jx824jxd816jx816jxd812jx812jxd ... Show all