Sunday Living KPT-173ND Manual

Advertisement

PTC HEATER
MODEL.: KPT-173ND
Thank you for purchasing your new heater.
These operating instructions will help you use it properly and safely.
We recommend that you spend some time reading this instruction manual in order that you fully understand all
the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual for future reference
Facebook: #SundayLiving
Message: #SundayLiving
Email: service@sundaylivinginc.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPT-173ND and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunday Living KPT-173ND

  • Page 1 PTC HEATER MODEL.: KPT-173ND Thank you for purchasing your new heater. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
  • Page 2 INTRODUCTION Please read this guidance carefully before using your fan heater, so that you can use it correctly. Please keep well with this guidance. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1、This heater must be plugged into a 120 V, amp (or more) circuit of its own.
  • Page 3 OVERHEAT SAFETY FEATURE This heater is equipped with an overheat safety feature. When the internal components of the heater reach a certain temperature that could cause overheating or possible fire, the heater will automatically shut off. If the unit has been overheated, you will need to unplug the unit from the wall and replug it in to use the heater again.
  • Page 4 urn on the power switch first, “O”= OFF,“—”ON; 1. Turn on the power switch, LED display “--”, the appliance is standby; See picture 1.1 2. Press “ ”as follows: ON (only Fan working), LED display Environment temperature(default is ℉ after the power cut off); OFF(Fan keep working for 30 seconds when shutdown the appliance(after heating);See picture 2.1 3.
  • Page 5 NOTE: Please feel free to contact Service Team for help if the remote control is missing or damaged. Facebook: #SundayLiving Message: #SundayLiving Email: service@sundaylivinginc.com 4.If you stop using heater, turn off all of the power switch, then put off the plug. 5.If you want to move the heater, please turn off the switches, then put off the plug.

Table of Contents