Advertisement
PTC HEATER
MODEL.: KPT-1606F-NO2
Thank you for purchasing your new heater.
These operating instructions will help you use it properly and safely.
We recommend that you spend some time reading this instruction manual in order that you fully understand all
the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual for future reference
Facebook: #SundayLiving
Message: #SundayLiving
Email: service@sundaylivinginc.com
Advertisement
Table of Contents
Related Manuals for Sunday Living KPT-1606F-NO2
Summary of Contents for Sunday Living KPT-1606F-NO2
- Page 1 PTC HEATER MODEL.: KPT-1606F-NO2 Thank you for purchasing your new heater. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
- Page 2 INTRODUCTION Please read this guidance carefully before using your fan heater, so that you can use it correctly. Please keep well with this guidance. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1、This heater must be plugged into a 120 V, amp (or more) circuit of its own.
- Page 3 OVERHEAT SAFETY FEATURE This heater is equipped with an overheat safety feature. When the internal components of the heater reach a certain temperature that could cause overheating or possible fire, the heater will automatically shut off. If the unit has been overheated, you will need to unplug the unit from the wall and replug it in to use the heater again.
- Page 4 1、Put the bottom of the appliance up. 2、Put the power cord through the center hole of the base and cover the base onto the appliance. 1、Fix the base and appliance together with 4pcs ST3×8 screw. 2、 After fixing the screws, clip the power cord into the card slot of the base.
- Page 5 appliance will stop heating. See picture 8.2-8.3 Set temperature is 1-2℃(1-4℉ or 5℉) higher than Environment temperature, appliance will low heat. See picture 8.4-8.5 Set temperature is higher or equal to Environment temperature+3℃(5 ℉ or 6℉), appliance will high heat. See picture 8.6 Note:℉...
- Page 6 NOTE: Please feel free to contact Service Team for help if the remote control is missing or damaged. Facebook: #SundayLiving Message: #SundayLiving Email: service@sundaylivinginc.com 4.If you stop using heater, turn off all of the power switch, then put off the plug. 5.If you want to move the heater, please turn off the switches, then put off the plug.
Need help?
Do you have a question about the KPT-1606F-NO2 and is the answer not in the manual?
Questions and answers