Read Commands; String Format: (S) - InFocus SP5000 Command Line Interface Manual

1.1.6 Read Commands

Read commands have the following format:
(AAA?)
A read command returns the current setting in an ASCII format enclosed in parentheses.
The following Format is defined:
1) Range Format (r-R,V)
2) String Format (S)
1.1.6.1 Range Format: (r-R,V)
where
(
r
R
V
)
Examples:
(VOL?) Read the current range and value of the projector's volume
(BRT?) Read the current range and value of the projector's brightness

1.1.6.2 String Format: (S)

where
(
S
)
Examples:
(VER?) Read the current software version
where,
( - starts the CLI command
AAA - denotes the CLI function
? - denotes the read request
) - ends the CLI command
open parenthesis marks the start of the CLI response
minimum value of the setting's range
maximum value of the setting's range
the current value of the setting
closing parenthesis marks the end of the CLI response
Returns: (0-127,64)
Returns: (0-255,128)
open parenthesis marks the start of the CLI response
character string
closing parenthesis marks the end of the CLI response
Returns: (v2.0)