Solutions to Common Problems
Problem: Nothing on projection screen
Make sure that the power cord is properly connected to a func-
•
tional AC electrical outlet. Make sure that the power cord is
also properly connected to the projector.
If the projector is plugged into a power strip, make sure the
•
power strip is turned on.
Make sure you have removed the lens cap from the projection
•
lens at the front of the projector.
Make sure the projector is switched on.
•
Check the projector's lamp to ensure that it is securely con-
•
nected in the lamp module. See "Replacing the Projection
Lamp" on page 33.
Problem: Image not being projected
You might need to adjust the brightness or contrast until the
•
image is visible. See page 21.
Verify that the appropriate input source is selected. See "Com-
•
puter" on page 17 or "Video" on page 18.
Problem: Image from VCR does not display properly.
Make sure "DVD Optimized" is turned off in the Image menu.
•
See page 25.
Adjust your VCRs sharpness control, if available.
•
Adjust the projector's contrast control to perfect the image.
•
Problem: Image from source using S-video does not display.
Press the Video 1 button on the remote to toggle between com-
•
posite video and S-video. See page 18.
Problem: PAL video does not display correctly.
Select PAL from the Video Standard options in the Controls
•
menu. See "Video Standard" on page 27.
Problem: Image has noise on the edges.
Turn on Overscan in the Image menu. See page 25.
•
37