Error messages on printed
When a problem has occurred, one of the following messages will be printed on the transmission and journal
reports.
PRINTED MESSAGE
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
CODE
41–72
¡A transmission or reception error occurred. Try again or check
FF
with the other party.
¡A document is jammed. Remove the jammed document (p. 109).
—
¡A transmission or reception error occurred because of a problem
—
with the other party's machine. Check with the other party.
¡The document was not received due to memory being full.
—
¡The document was not fed into the unit properly. Try again.
—
¡The receiving unit was busy or ran out of recording paper. Try
—
again.
¡The START/COPY/SET button was pressed when the document
was not set properly. Set the document properly and press the
START/COPY/SET button after confirming the fax tone.
¡The other party's machine is not a facsimile. Check with the other
party.
¡The STOP button was pressed and fax communication was
—
canceled.
¡The front cover was opened during fax transmission.
—
¡Fax communication was successful.
—
For Assistance, Call 1-800-435-7329
Error Messages
reports!
MEANING
95