Panasonic KX-FMC230 Operating Instructions Manual page 61

Changing from the FAX ONLY mode to the EXT.TAM
Change the AUTO RECEIVE setting from the FAX ONLY mode to the EXT.TAM mode.
Press (MENU).
1
Display:
K @ E
2
Press , then
Press (START/COPY/SET).
3
4
Press or to select EXT.TAM.
¡To return to the FAX ONLY mode, select
FAXonly.
Press (START/COPY/SET).
5
Press (MENU).
6
Using the EXT.TAM
To set the facsimile unit and telephone answering machine to receive voice messages and send fax
messages, proceed as follows.
1 Turn on the answering machine.
¡If the answering machine is not turned on, all
incoming calls will be answered by the facsimile
unit and callers cannot leave messages.
Press (AUTO\RECEIVE) on the facsimile unit until
2
the FAX indicator light will turn on.
¡The display shows the following message.
Display:
Note:
¡Every time the facsimile unit receives a document, a
silent pause or fax tone may be recorded on the
answering machine.
¡Set the receive mode of the facsimile unit to the TEL
mode under the following conditions:
—when you wish to set the number of rings on the
answering machine to more than 5, or
¡—when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine.
¡Note that automatic fax sending can not be received
automatically in the TEL mode.
SYSTEM SET UP
.
AUTO RECEIVE
ML
MODE=FAXonly[
ML
MODE=EXT.TAM[
SETUP ITEM [ ]
mode!
EXT.TAM MODE
Dial keypad
1 2 3
4 5 6
7 8 9
0
]
]
(START/COPY/SET)
Receiving Faxes
mode!
(MENU)
AUTO RECEIVE
FAX
The FAX indicator is on.
61