Adjusting The Projector - InFocus LP770 User Manual

Infocus lp770: reference guide

Hide thumbs Also See for LP770:

Table of Contents

Adjusting the Projector

To focus the image, press the

keypad. "Focus" appears on the screen. Press the adjacent "+" or

"-" buttons until the image is clear. To zoom the image, press the

button again. "Zoom" appears on the screen. Press

Zoom/Focus

the "+" or "-" buttons to adjust the size of the image. This adjusts

the size without affecting focus.

The projector is equipped with self-locking, quick-release eleva-

tor feet and buttons (Figure 11).

To raise the projector:

1 Press and hold the elevator buttons (Figure 11).

2 Raise the projector to the height you want, then release the

buttons to lock the elevator feet into position.

3 If necessary, rotate the feet to adjust the angle of the projected

image.

button on the remote or

Zoom/Focus

elevator button

elevator foot

Adjusting the height of the projector

NOTE: Focus and zoom adjust-

ments are available while in nor-

mal mode only. They are not

available in PinP or Expand modes.

IGURE

Table of Contents