Connecting A Computer - InFocus LP770 User Manual

Connecting a Computer

1 (Desktop models only) Locate the cable that connects your
monitor to your computer. Unplug it from the computer.
2 Plug one end of the VESA computer cable into the video con-
nector on your computer.
3 Plug the other end of the VESA computer cable into the
or connector on the projector.
puter 1 2 In
Do you want to display the image on your computer's monitor as well
as on the projection screen?
1 Plug your monitor's cable into the
on the projector.
Do you want to play your computer's audio on the projector?
1 Plug either end of the audio cable into the audio connector on
your computer.
2 Plug the other end of the audio cable into the
connector on the projector.
Connecting the projector to a computer
connector
Computer Out
Audio 1
Com-
NOTE: Many laptop computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers
are listed in the Appendix of this
manual on page 42 and in the
F 5
IGURE
Service section of our website.
NOTE: The projector must be
turned on to display the image on
your monitor.
or
2 In
NOTE: If you are connecting an
older Macintosh computer that
does not have a VESA (15-pin)
connector, you must use a Mac
adaptor between the computer
and the projector. See "Optional
Accessories" on page 41.
7