Adjusting The Projected Image; Adjusting The Projector's Height - InFocus IN13x Series Manual

Installation
The blue spacers

are only applicable
for IN13xST
models. Do not
remove them from
the tilt-adjustment
feet.
16
English

Adjusting the Projected Image

Adjusting the Projector's Height

The projector is equipped with tilt-adjustment feet for
adjusting the image height.
1. Locate the tilt-adjustment foot you wish to modify on the
underside of the projector.
2. Rotate the adjustable ring clockwise to raise the projector
or counter clockwise to lower it. Repeat with the remaining
feet as needed.
Tilt-Adjustment Feet
Blue Spacer
(for IN13xST models
only)
Tilt-Adjustment Foot