Maintenance & Troubleshooting; Cleaning The Lens; Cleaning The Fan Intake Filter - InFocus LP 730 User Manual

MAINTENANCE & TROUBLESHOOTING
This section describes how to:
clean the lens
•
clean the fan intake filter
•
replace the projection lamp
•
replace the batteries in the remote control
•
use the Kensington lock feature
•
troubleshoot the projector
•

Cleaning the Lens

Follow these steps to clean the projection lens:
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Avoid using an excessive amount of cleaner.
•
Abrasive cleaners, solvents or other harsh chemicals might
•
scratch the lens.
2 Lightly wipe the cleaning cloth over the lens.
3 If you don't intend to use the projector immediately, replace
the lens cap.

Cleaning the Fan Intake Filter

The fan intake filter on the bottom of the projector catches dust
and particles in the air. If the filter becomes clogged, the projector
does not cool properly and may malfunction. To prevent this,
clean the filter after every 100 hours of use.
1 Turn off the power and unplug the power cord.
2 Remove the filter door.
Carefully place a screwdriver against the indented part of
•
the filter door and lift out.
39