InFocus LP 730 User Manual page 23

S e t t i n g
CAUTION: Your video player
may also have a "Video Out" port
for a coaxial cable connection.
DO NOT use this to connect to the
projector.
20
u p t h e
F 19
IGURE
Connecting the projector to a video player using an S-video cable and the audio con-
nectors on the standard A/V cable
4 Plug the A/V cable's white connector into the left "audio out"
port on your video player. Plug the cable's red connector into
the right "audio out" port on the video player (Figure 18 and
Figure 19).
If you're using an S-video cable, the yellow connectors on
•
the A/V cable remain unused (Figure 19).
5 Plug the A/V cable's other white and red connectors to the
left and right "audio in" ports on the projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM.
It automatically adjusts to optimize its performance for the
incoming video. The input signals for SECAM, PAL-M, and
PAL-N video cannot be automatically detected, therefore they
must be chosen manually; see "Video Standard" on page 37.
P r o j e c t
S-video cable
A/V cable
o r