Connecting The Cablewizard™ To The Projector; Selecting Connectors On The Cablewizard - InFocus LP 730 User Manual

S e t t i n g
CAUTION: Turn off the
computer, monitor and projector
whenever you connect or
disconnect cables.
NOTE: The projectors are
optimized for use with
CableWizard II. If you have
CableWizards from other models
of In Focus projectors, we do not
recommend using them. Image
quality is reduced by using a
CableWizard other than Cable
Wizard II. The label on the bottom
reads CableWizard or
CableWizard II.
NOTE: You must disconnect all
cables before turning the selector
on the CableWizard.
8
u p t h e
Connecting the CableWizard™ to the Projector
The CableWizard simplifies the connection process by providing
a central hub for all the connections between the projector and
your computer. The connectors on the CableWizard are labeled
with icons.
Connect the
connector on the projector's connector panel (Figure 5).
F 5
IGURE
Connecting the CableWizard to the projector

Selecting Connectors on the CableWizard

Turn the selector on the top of the CableWizard to reveal the
correct connectors for your computer.
F 6
IGURE
Selecting connectors on the CableWizard
P r o j e c t
end of the CableWizard cable to the
o r