Fisher & Paykel WD8060P1 Troubleshooting Manual page 2

Problem Possible Causes
Blocked hose filter.
Inlet hose leaking,
twisted or damaged.
Faulty water supply.
'Delay Start' may be
set.
Washer
dryer is
paused
light is flashing.
Solving General Operating Problems
Problem
The washer
dryer has
detected a
fault.
Power or water
failure.
Washer dryer
stops working
mid cycle
Washer dryer
has been
paused.
Too many
suds.
Transit bolts
left in place.
Vibrating
Washer dryer
may not be
level.
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/Washer_Dryer_Combo/WD8060P1/User_Guide_WD8060P1/16...
Check the tap end of the inlet hose for blockages.
Check the inlet hose for leaks or damage. Check that the inlet hose is not
twisted.
Check the cold tap is connected to the machine and is working.
Refer to 'Wash & Dry Cycle Options'.
Touch the
button to resume the cycle.
Possible
Causes
Refer to 'Before you Call for Service' and 'Fault Codes')
Check the power and/or water is working correctly.
Touch the
button to continue
Washer dryer is waiting for suds to dissolve before continuing the cycle.
Ensure transit bolts are removed prior to use of the product (refer to
'Installation Instructions').
Ensure washer dryer is installed on an appropriate surface and levelled
correctly (refer to 'Installation Instructions').
What To Do
What To Do
Updated: Wed, 17 Nov 2021 19:03:07 GMT
Powered by
2