Adjusting The Projector - InFocus LP340 Reference Manual

Adjusting the Projector

To focus the image, rotate the focus ring (Figure 10) until the
image is clear. To zoom the image, rotate the zoom ring. This
adjusts the image size without affecting focus.
zoom ring
focus ring
The projector is equipped with a self-locking, quick-release eleva-
tor foot and button and a leveling knob (Figure 11).
To raise the projector:
1 Press and hold the elevator button (Figure 11).
2 Raise the projector to the height you want, then release the
button to lock the elevator foot into position. If necessary, turn
the leveling knob at the rear of the projector to adjust the
angle of the projected image.
elevator button
(under finger)
Focus ring and zoom ring
elevator foot
Adjusting the height of the projector
F 10
IGURE
leveling
knob
F 11
IGURE
17