Controls Menu - InFocus LP340 Reference Manual

Controls Menu

Display Audio Image
Video Standard
When Video standard is set to Auto, the projector attempts to
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
PAL-60, or SECAM) automatically based on the input signal it
receives. (The video standard options may vary depending on
your region of the world.) If the projector is unable to detect the
correct standard, the colors might not look right or the image
might appear "torn." If this happens, manually select a standard
by clicking the left or right mouse button and cycling through the
standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among instant, 1, 5, 10,
15 and 30 minutes and 1 and 2 hours by clicking the left or right
mouse button and cycling through the options.
Ceiling Projection
When you turn
Ceiling Projection
image upside down for ceiling-mounted projection. Highlight
Ceiling Projection, then click the left or right mouse button to
turn this feature on and off.
Controls Language
> >
Video standard
Standby time
Ceiling projection
Rear projection
Default source
Auto source select
Plug and Play
Display messages
Display startup screen on
on, the projector turns the
Status
1 minute
off
off
computer 1 analog
off
off
on
F 17
IGURE
Controls menu
NOTE: If you already know the
video standard used in your geo-
graphical area, it's often best to
manually select it.
27