Tyco TY-B Series Quick Start Manual

Series TY-B & TY-FRB, 10 mm Orifice, ISO 7/1-R3/8
Upright, Pendent, and Recessed Pendent Sprinklers
Standard and Quick Response
General
Description
The TYCO Series TY-B (5 mm Bulb) and
TY-FRB (3 mm Bulb), 10 mm orifice Up-
right and Pendent Sprinklers are au-
tomatic sprinklers of the frangible bulb
type. They are spray sprinklers intend-
ed for use in fire sprinkler systems de-
signed in accordance with the installa-
tion rules recognized by the applicable
Approval agency. Both the Upright and
Pendent Sprinklers produce a hemi-
spherical water distribution pattern be-
low the deflector.
The recessed version of the Series
TY-B and TY-FRB Pendent Sprinklers,
where applicable, are intended for use
in areas with a finished ceiling. They
use a two-piece Style 70 (ISO 7/1-R3/8)
Recessed Escutcheon with 12 mm of
recessed adjustment or up to 20 mm of
total adjustment from the flush pendent
position. The adjustment provided by
the Recessed Escutcheon reduces the
accuracy to which the fixed pipe drops
to the sprinklers must be cut.
NOTICE
The Series TY-B and TY-FRB Sprin-
klers described herein must be installed
and maintained in compliance with this
document and with the applicable
standards recognized by the Approval
Agency, in addition to the standards of
any other authorities having jurisdiction.
Failure to do so may impair the perfor-
mance of these devices.
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling
installation of sprinkler systems and
components. Improper handling and
installation can permanently damage
a sprinkler system or its components
and cause the sprinkler to fail to
operate in a fire situation or cause it
to operate prematurely.
Page 1 of 6
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition. The
installing contractor or sprinkler manu-
facturer should be contacted with any
questions.
Sprinkler
Identification
Number (SIN)
TY2108 - Upright, 5 mm bulb
TY2208 - Pendent, 5 mm bulb
TY2109 - Upright, 3 mm bulb
TY2209 - Pendent, 3 mm bulb
Technical
Data
Approvals
LPCB and VdS Approved.
Refer to Table A.
Maximum Working Pressure
12,1 bar
Discharge Coefficient
K=58 LPM/bar
1/2
Temperature Rating
Refer to Table A.
Finishes
Refer to Table A.
Physical Characteristics
Frame . . . . . . . . . . . . . . . . . . . Bronze
Button. . . . . . . . . . . . . . Brass/Copper
Sealing Assembly. . . . . . . . .Beryllium
Bulb . . . . . . . . . . . . . . . . . . . . . .Glass
Compression Screw. . . . . . . . Bronze
Deflector. . . . . . . . . . . . . . . . . Copper
and
FEBRUARY 2012
Technical Services
Nickel w/TEFLON
800-381-9312
+1-401-781-8220
www.tyco-fire.com
TFP670