1. Manuals
  2. Brands
  3. VaporFlame Manuals
  4. DJ Equipment
  5. VF8b
  6. Manual

VaporFlame VF8b Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VF8b Manual


Page
1
of
12
Rev. 2.0 11/20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VF8b and is the answer not in the manual?

Questions and answers

Related Manuals for VaporFlame VF8b

Summary of Contents for VaporFlame VF8b

  • Page 1 VF8b Manual 
 Page Rev. 2.0 11/20...

  • Page 2: Table Of Contents

    What’s In the Box “Let’s Unpack That…” Powering Up Getting A Hold of Us 2. Safety Instructions 3. Meet the VF8b Main Features Product Description 4. Setup Attach 8b unit to the light source. (FIGS 1 & 2) Connect Power and Data to the 8b. (FIG 3) Set the DMX address.

  • Page 3: Getting Started

    1 x VaporFlame Bleeder Hose “Let’s Unpack That…” Hey! Look at that! You are the proud owner of a shiny new VaporFlame fixture. You now have the power to make “fire” from water- Pretty cool huh? As you unpack your VaporFlame fixture from its shipping material make sure all the parts are present.

  • Page 4: Safety Instructions

    • ALWAYS secure unit and lighting fixture using separate safety chains. NEVER carry the fixture by its head. Be sure the VaporFlame is secured to its light source. • PROTECT THE UNIT FROM FREEZING. DO NOT operate at ambient temperatures lower than 20°F (-6°C) or higher than 104°F (40°C).
  • Page 5 Page Rev. 2.0 11/20...

  • Page 6: Meet The Vf8B

        The VF8b takes 2 channels of DMX, for individual control of the air and water output.  Adjustment dials allow the user to control the fullness of the flame from the unit, creating the most realistic fake flame available.

  • Page 7: Setup

    2. Slide the edges of the 8b chassis all the way into the gel frame slot. -OR- 1. Attach the VaporFlame Mounting Adapter to the face of your lighting unit using appropriate screws. FIG. 2 2. Attach the VaporFlame chassis to the Mounting Adapter using pan-head screws and safety nuts 3.

  • Page 8: Set The Dmx Address. (Fig 4)

    63mm [63.00] Set the DMX address. (FIG 4) 1. Choose MENU. 2. Use UP/DOWN buttons until D001 is displayed. 45.2m [45.2 Choose ENTER 4. Use UP/DOWN to select the desired start address. Choose ENTER. Menu Enter Down 6. DMX start address is now set. FIG.

  • Page 9: Adjust Air & Water Ratio (Fig 7)

    Storing the Unit Be sure to drain remaining water from the unit before storage. 1. Briefly connect the air supply to the water in on the VF8b unit. This creates a bubble of air to clear the water line. 2. Disconnect the air supply from the unit and reconnect correctly. Run the unit using ONLY the air channel.

  • Page 10: A Few More Things

    Any clean potable water can be used in the VF8b. In short, if you can drink it, so can the VF8b! Debris in the water line can clog and damage the VF8b unit. We recommend installing a filter for debris on the water supply line.

  • Page 11: Warranty

    If VaporFlame determines the fixture is under warranty, then VaporFlame will correct the issue and ship back to owner at VaporFlame’s expense. If VaporFlame determines the fixture is not under warranty, VaporFlame will ship the fixture back to the owner at the owners expense.

  • Page 12: Tips And Tricks

    Tips and Tricks VF8b Tips and Tricks I want a cool flickery effect 1. While the effect is running, bump the water channel (channel 2) on/off from the control console. 2. Water remaining in the 8b will run through and the plume will die down.

Table of Contents