Advertisement
Important Safety Instructions
DANGER, ELECTRICAL, SHOCK, FIRE
GENERAL SAFETY INFORMATION
Read all instructions before using this fan.
1. Make certain the power source conforms to the electrical requirement of the fan.
2. Make sure the room is equipped with a working smoke detector.
3. Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause
fire, electrical shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock, the fan should not be played with or placed where small
children can reach it. Close supervision is necessary when any appliance is used by or near children or disabled
people.
5. Unplug the power cord before installing, servicing, or moving the fan.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS DISCONNECTING
POWER WHEN SERVICING OR MOVING THE FAN.
6. This fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden
atmospheres. To protect against electrical shock do not immerse the unit, plug, or cord in water or spray with
liquids.
7. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock,
this plug is intended to fit in a polarized outlet only one way. Match the wide blade of the plug to the wide slot.
Fully insert. If the plug does not fit in the outlet contact a qualified electrician. Do not attempt to defeat this
safety feature.
8. This product employs overload protection (fuse). A blown fuse indicates and overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet. To replace the fuse open the fuse cover, remove the fuse
and replace with a new fuse (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an
authorized service facility for examination and/or repair.
This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if
the attachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove,
replace, repair, or tamper with the originally supplied plug. If the fan does not function properly, it may be due
to the safety device incorporated in this plug. If the plug warning label is missing or damaged, call (877) 565-
1457 Monday through Friday 8 am -5 pm central.
9. Where possible, avoid the use of extension cords because an extension cord may overheat and cause fire. If you
877-565-1457
2
Advertisement
