Wavetec Spectra Installation Manual page 8

The controller provides following functionalities:
Power
 2.5mm DC Jack to Power up the unit with Meanwell supply (12V, 3.34A) included in
package.
CDU ports
 RJ45 Ports marked CDU can be used to drive Display devices over RS485 protocol (Active
Hub will be needed).
Audio
 Two RJ45 ports for connecting 8 Ohm speakers.
 Volume Knob for controlling volume level.
Debug port (DB-9 Connector)
 A standard FTDI cable (RS232 to USB) can be plugged into this port for debugging
purpose.
USB port
 Two USB 2.0 ports can be used to connect peripherals like keyboard and mouse.
 One USB OTG port can be used for upgrade.
LAN port
 For providing internet or LAN connectivity to the unit.
LED indicators:
 Wavetec Logo with White Backlit LED that glows when unit is powered ON.
8