Wavetec Spectra Installation Manual page 10

Description:
 Connect the Spectra controller as shown in wiring diagram above.
 When using TCP Active Hub, Spectra can be configured to transfer data for displays (CDUs,
SDUs and PDUs) and HTSUs over TCP/IP connection to TCP Active Hub.
 TCP Active Hub must be connected to same local network as Spectra is connected to.
 It is recommended to use this mode if using TCP Active Hub (for setting up TCP Active Hub
refer "TCP Active Hub installation guide")
Note:
 It is recommended to use Cat5e or Cat6 LAN cable/Patch cord.
 When operating in TCP/IP mode we won't be using CDU port.
10