Serial Mode (Over Rs485) - Wavetec Spectra Installation Manual

6.1.3 Serial Mode (over RS485)

Wiring Diagram:
Volume Knob - Rotate
clockwise to increase
volume
Power adapter
12V 3.43A
Description:
Connect the Spectra controller as shown in wiring diagram above.
1) Driving displays (CDUs, SDUs and PDUs):
 In order to drive displays connect one end of patch cord (Straight cable – RJ45 on both
ends) to port marked "CDU" in Spectra and other end to Active Hub/TCP Active Hub port
marked "IN".
 All the End Devices (Displays) can be connected to any of the 16 output ports of Active Hub.
Refer to Active Hub installation guide for further details, ensure that the DIP switch setting
of the Active Hub is as per the document and that termination is disabled.

To connect external
amplifier or headphone speaker
(optional)
2 x 8Ω Ethernet
switch
11