1. Manuals
  2. Brands
  3. SmartPro Manuals
  4. Scanner
  5. Finder I
  6. User manual book

SmartPro Finder I User Manual Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4
4. TAKING CARE of your SmartPro Finder I
a. The probe and wire tip is extremely sensitive and should be handled with care. Please always
II. About the SmartPro Finder I
replace the protective cap. Caution should be taken so as not to damage the probe and wire tip
The SmartPro Finder I is a pocket sized instrument that instantly verifies the authenticity of
diamonds based on their thermal properties. Diamonds, with their exceptional heat conductivity
b. Do not leave worn out batteries in the battery compartment as the batteries may corrode, leak
properties, are unlike any other simulants, natural or synthetic, and are therefore not easily replicable.
or damage the tester. Batteries should be removed when the tester is expected to be stored fo
an extended period of time.
As with all thermal testers in the market, the SmartPro Finder I is not able to differentiate between
4
natural diamonds and moissanite.
Thank you for choosing our SmartPro Finder I and taking time for the user manual book which wi
enable you to understand your recent purchase better.
The SmartPro Finder I has been subjected to thorough and extensive laboratory tests, and will
generally give a clear and reliable reading of the gemstone being tested under proper use. However,
SmartPro Instrument also recommends that you register your warranty by sending the warrant
you are advised to conduct further supporting tests.
registration card to us or registering online at http://www.smartproinstrument.com
28
9
7
5
3
2
10
Composition
1. Retractable probe tip
8
2. Serrated Metal Part
3 "Ready" Indicator LED
6
4. "Low Battery" Indicator LED
5. "Metal" Indicator LED
6. "Simulant" Indicator LEDs
7. "Diamond" Indicator LED
8. ON/OFF Button Switch
9. Battery compartment

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Finder I and is the answer not in the manual?

Questions and answers

Related Manuals for SmartPro Finder I

Summary of Contents for SmartPro Finder I

  • Page 1 Batteries should be removed when the tester is expected to be stored fo Composition an extended period of time. As with all thermal testers in the market, the SmartPro Finder I is not able to differentiate between 1. Retractable probe tip natural diamonds and moissanite.
  • Page 2 alibration ll testers have been calibrated during the manufacturing process and no further adjustment or III. IMPORTANT NOTICE III. IMPORTANT NOTICE ser intervention to the tester is required. a. Keep the tester dry. Precipitation and all types of liquids or moisture can contain minerals tha a.
  • Page 3 Exposure and/or operation of the tester ewelry piece to adjust to room temperature prior to testing. Exposure and/or operation of the tester ll. ABOUT THE SMARTPRO FINDER I outside the room temperature would affect the result and performance of tester.
  • Page 4 Introduction Congratulations on your new SmartPro Finder I a synchronized and highly effective Diamond Tester Cleaning your gemstone prior to testing that helps you verifies the authenticity of diamonds based on thermal conductivity. Prepare clean tissue / jewelry cloth. Carefully retrieve the gemstone with tweezers and place th Cleaning your gemstone prior to testing gemstone face down the table (Fig.1.7).
  • Page 5 Composition To prevent inaccurate readings, replace with new battery as soon as the “Low Battery” indicato As with all thermal testers in the market, the SmartPro Finder I is not able to differentiate between 1. Retractable probe tip Composition LED is blinking and become faster when battery near to empty.
  • Page 6 The SmartPro Finder I features the following: alibration a. High efficiency diamond tester l testers have been calibrated during the manufacturing process and no further adjustment or III. IMPORTANT NOTICE b. Retractable thermoelectric probe tip that ensures constant pressure between probe tip and ser intervention to the tester is required.
  • Page 7 Cleaning your gemstone prior to testing Prepare clean tissue / jewelry cloth. Carefully retrieve the gemstone with twe a. SmartPro Finder I f. Do not drop, knock, or shake the tester. Rough handling can break internal circuit boards and b. User manual book gemstone face down the table (Fig.1.7).

  • Page 8: Table Of Contents

    (+) and negative (-) directions of batteries (Fig 1.1). The use of Alkaline batteries is 3 “Ready” Indicat the warranty card. SmartPro warranty for its testers are subject to proper use by its user in accordance preferred, as it should generally give approximately 2.5 hours continuous operation, While th preferred, as it should generally give approximately 2.5 hours continuous operation, While the...
  • Page 9 Composition 1. Retractable probe tip 2. Serrated Metal Part 3 “Ready” Indicator LED 4. “Low Battery” Indicator LED 5. “Metal” Indicator LED 6. “Simulant” Indicator LEDs tor LED 7. “Diamond” Indicator LED 8. ON/OFF Button Switch LEDs 9. Battery compartment 10.
  • Page 10 III. IMPORTANT NOTICE Recommended testing conditions The gemstone should be clean and dry before testing. However, elaborate cleaning procedure a. Keep the tester dry. Precipitation and all types of liquids or moisture can contain minerals that III. IMPORTANT NOTICE Recommended testing conditions are not normally necessary (Fig.1.6).
  • Page 11 Bangkok 10150 Thailand To achieve optimum accuracy for tests involving very small, it is important to allow the gemstone Bangbon 1 Rd., Bangbon . READING TEST RESULT on SmartPro Finder I +66 (0) 2 899 2956-7 to cool down before subsequent tests.

  • Page 12: Enter Of The Test Pad (Fig.1.8)

    (Fig.1.8). 1. GETTING STARTED with SmartPro Finder I Powering up Cleaning your gemstone prior to testing This tester can be powered by the use of batteries. Required AAA Batteries (x2), take note of Prepare clean tissue / jewelry cloth. Carefully retrieve the gemstone with tweezers and place the the positive (+) and negative (-) directions of batteries (Fig 1.1).
  • Page 13 Recommended testing conditions The gemstone should be clean and dry before testing. However, elaborate Turning on are not normally necessary (Fig.1.6). Remove the protective cover from the probe tip (Fig. 1.2). Fig. 1. Fig. 1.2 Cleaning the probe tip Please note that if the tester is being used for the...

  • Page 14: About The Smartpro Finder I

    Bangbon 1 Rd., Bangbon SmartPro Instrument co.,ltd Bangkok 10150 Thailand As with all thermal testers in the market, the SmartPro Finder I is not able to differentiate between Fig. 1.6 249/40, Moo 9, J.S.P. Building +66 (0) 2 899 2956-7 natural diamonds and moissanite.
  • Page 15 Self-calibration should not be attempted. To minimize any risk associated, user should contact SmartPro at customercare@smartproinstrument.com or its service center for assistance. In the event that users require the manufacturer to re-calibrate the unit, the users will bear the associated to/from freight cost for the shipping of unit to the service center.

  • Page 16: Disclaimers, Exclusions And Limitations Of Liability

    This is to provide a steady and constant contact made the warranty card. SmartPro warranty for its testers are subject to proper use by its user in accordance preferred, as it should generally give approximately 2.5 hours continuous operation, While th b.

  • Page 17: Fig

    SmartPro Finder I (SPF I) referred to in this user manual is provided and/or sold on n “as is” basis. Except as required by applicable law, no warranties of any kind, either expressed r implied, including, but not limited to, the implied warranties of merchantability and fitness for a Fig.
  • Page 18 Recommended testing conditions The gemstone should be clean and dry before testing. However, elaborate cleaning procedures For testing loose gemstones are not normally necessary (Fig.1.6). Place the gemstone on the metal stone tray and it with one hand while holding the tester with the other hand (Fig.2.2).
  • Page 19 Please note that if the tester is being used for the first time, or if the tester h a. Ensure the unit is switched off. a week, it is advisable to clean the probe tip using an oxidation removal shee The recommended testing temperature is 18 C - 27 C or 65...

  • Page 20: Smartpro Finder I

    Cleaning your gemstone prior to testing ngle (90 degree) with an oxidation removal. Prepare clean tissue / jewelry cloth. Carefully retrieve the gemstone with tweezers and place the a. SmartPro Finder I tip (Fig. 1.5). gemstone face down the table (Fig.1.7).

  • Page 21: Composition

    Gently rub the table of gemstone against the tissue/jewelry cloth and place the gemstone on the center of the test pad (Fig.1.8). Composition 1. Retractable probe tip 2. Serrated Metal Part 3 “Ready” Indicator LED 4. “Low Battery” Indicator LED 5.
  • Page 22 To prevent inaccurate readings, replace with new battery as soon as the “Low Battery” indicator As with all thermal testers in the market, the SmartPro Finder I is not able to differentiate between LED is blinking and become faster when battery near to empty.

  • Page 23: Simulant" Indic

    Self-calibration should not be attempted. To minimize any risk associated, user should contact . Diamond indicator LED blinking with sound SmartPro at customercare@smartproinstrument.com or its service center for assistance. In the . Metal detection indicator LED alarm with ringing sound.
  • Page 24 2. PERFORMING A TEST with SmartPro Finder I Please note that if the tester is being used for the first time, or if the tester has not been used for a week, it is advisable to clean the probe tip using an oxidation removal sheet to attain consistent Place the tip of the probe pen against the gemstone.
  • Page 25 Fig. 1.5 Fig. 2.1 While in this preparation mode, you can check status through the ORANGE “Ready” LED will blink...
  • Page 26 Recommended testing conditions The gemstone should be clean and dry before testing. However, elaborate cleaning procedures For testing loose gemstones are not normally necessary (Fig.1.6). Place the gemstone on the metal stone tray and it with one hand while holding the tester with the other hand (Fig.2.2).

  • Page 27: Important Notice

    . Do not drop, knock, or shake the tester. Rough handling can break internal circuit boards and fine mechanics. 3. READING TEST RESULTS on SmartPro Finder I CONTENTS g. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the tester.
  • Page 28 Metal stone tray an extended period of time. Thank you for choosing our SmartPro Finder I and taking time for the user manual book which will enable you to understand your recent purchase better. SmartPro Instrument also recommends that you register your warranty by sending the warranty...
  • Page 29 Gently rub the table of gemstone against the tissue/jewelry cloth and place the gemstone on the center of the test pad (Fig.1.8). GENERATION AHEAD TECHNOLOGY Fig. 1.8...

Table of Contents