Waykar CFD2.5D User Manual page 11

Operation Instructions
Fault Code
No. Fault code
1 E0
2 E1
3 E2
4 E3
5 E4
6 E5
7 E6
8 E7
9 E8
10 E9
11 EA
12 Eb
13 Ec
Notes:
1. When E0, E1, E2, E4, EA or Eb occurs, the fan and compressor will not stop. The
machine can still be restarted again after shut down (Press any button can stop the
alarm.).
2. If the display screen reads the error code of E3, E5, E6, E8 or E9, you need to
unplug the unit after troubleshooting and reconnect the power to release the alarm.
3. When Ec occurs, the machine operation will not be controlled by the control panel.
If the Error Code is still present, please don't hesitate to contact Waykar Customer
Service email at
Defrost Temperature Sensor 2 Failure
Humidity Sensor Failure
Defrost Temperature Sensor 1 Failure
Phase Sequence Failure (not Applicable Under Uniphase Condition )
Temperature Sensor Failure
High Voltage Failure
Low Voltage Failure
Full Water Alarm
Compressor Current Overload Failure
Fan Current Overload Failure
Defrost Temperature Sensor 3 Failure
Defrost Temperature Sensor 4 Failure
Display Panel Abnormal Transmission
support@waykar.com
Fault name
for help.