Maintenance - Tar River ERC Operation And Parts Manual

MAINTENANCE

1. Periodically check and maintain proper gear oil level.
2. Approximately every 8 hours, grease spindles, roller axle, wheel forks, wheel
axles, PTO shaft universal joints, and PTO telescoping surface.
NOTE
: Use a high-temp / multi-purpose grease.
3. Before each use check to make sure all safety features are installed and
working properly.
4. Keep blades sharp and balanced at all times. When replacing the blades,
replace all blades and blade bolts and the same time.
5. Periodically check all nuts, bolts, and belt to insure they are tight and secure.
Arrows indicate grease points.
12