Advertisement
TRANSPORT SAFETY
Always observe your state and local laws governing highway safety and
the travel of farm machinery on public roads.
The use of flashing amber lights is acceptable in most locations. However,
some locations prohibit use. Local laws should be checked for all lighting
and marking requirements.
When driving the tractor and equipment on roads or highways use
flashing amber warning lights and a slow moving vehicle (SMV)
identification emblem. Do not exceed 20 mph. Reduce speed on rough
roads and surfaces.
Plan your route to avoid heavy traffic.
Always install transport locks, pins or brackets before transporting.
Do not drink and drive.
Be a safe and courteous driver. Always yield to oncoming traffic in all
circumstances, including narrow bridges, intersections, etc. Watch for
traffic when crossing or operating in close proximity to roadways.
Turn curves and go up and down hills only at a low speed and at a gradual
steering angle. Make certain that a least 20% of the tractor's weight is on
the front wheels to maintain safe control. Slow down on rough and/or
uneven surfaces. Always check tractor manual for proper use on slopes.
Use extreme care and maintain minimum ground speed when operating
close to ditches and/or fences. Be careful when turning sharp corners.
Never allow riders on either tractor or mower.
7
Advertisement
