Table of Contents
Advertisement
ERC Square Back Rotary Cutter
DANGER: Stop engine, lock parking brake and remove key before performing any
service or maintenance.
Never rely on the tractor lift system. Place blocks or stands under the rotary cutter deck to
prevent it from falling, causing serious injury or death.
Always use personal protection devices, such as glasses or gloves when performing mainte-
nance on the rotary cutter.
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
•
Make sure there is plenty of ventilation. Never operate the engine of the towing
•
vehicle in a closed building. The exhaust fumes may cause asphyxiation.
•
Always use the proper tools or equipment for the job at hand.
•
Use extreme caution when making adjustments.
•
Never replace hex bolts with less than grade five bolts unless otherwise specified.
•
After servicing, be sure all tools, parts and service equipment are removed.
•
Where replacement parts are necessary for periodic maintenance and servicing, genuine factory
•
replacement parts must be used to restore your equipment to original specifications. The manufacturer will
not claim responsibility for use of unapproved parts and/or accessories and other damages as a result of
their use.
•
for injury or warranty.
Check all the tightness of all hardware on the rotary cutter on a regular basis. Check condition of blades
•
and stump jumper.
Check the gear box for proper amount of oil. Grease the tail wheel arm and tail wheel as necessary.
•
Maintenance/Service
maintenance.
17
liability
Advertisement
Table of Contents
