Before Each Use; Battery Care - Ratikon SPTtot007 User Manual

The bike will be ready to ride and the LCD will activate showing Current speed, trip distance,
ODO, power and battery SOC. Turning the pedals for more than ¼ of a revolution will now
activate the motor.
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set to 0 when
mounting, dismounting and turn the bike off when leaving it unattended.
To set the assist levels, toggle with the + and – buttons
2.1.10 To avoid the use of a bicycle trailer or outboard bicycle.

2.1 Before each use

It is important you check your bike prior to each time you use it. Checks should include the following:
(If you do find any damage or problems, do not use the bike until the problem has been solved or
you have had the faulty item checked by an electric bike mechanic or your retailer).
2.2.1 Check the tyres for any visible damage.
2.2.2 Check the tyre pressure.
2.2.3 Check for any loose nuts, bolts or fixings. Check all folding mechanism clamps are
closed tight and locked.
2.2.4 Check the brake functions.
2.2.5 Check the electronic functions.
2.2.6 Check the reflectors are in place and the lights are working.
2.2.7 Check the battery for any visible signs of damage.

2.2 Battery care

2.3.1 Your Ratikon bike comes with a high quality lithium ion battery. All lithium batteries need to
be looked after to ensure years of full use. Following these easy steps will ensure the long
life of your battery.
2.3.2 Recharge your battery after every use if possible. Keeping your battery charged extends its
life and your bike is always ready to go.
2.3.3 You do not have to "condition" your battery by charging and discharging before it's first use.
This was the case with old lithium ion technology but is not necessary on modern batteries
2.3.4 Never leave your battery completely discharged for more than 24 hours. Voltage dropping
below minimum for any length of time will cause serious damage to your battery cells. *
5