Table of Contents
Advertisement
P V
M O D U L E
I N S T A L L A T I O N
M A N U A L
1. Basic Information /
1.1 Summary
Firstly, thanks for choosing DAH Solar PV modules. In order to ensure the PV modules to be installed correctly and to have
power output stability, please read the following operation instructions carefully before installing and using. Please
remember that you are using a electricity generation product, in order to avoid any accident, it should adopt relative
security measures.
Make sure that the current and voltage values which generated a er the connection of the module are within the range of
the current and voltage values of the other devices connected to the PV array. The maximum permitted system voltage (DC)
of the modules is 1500V DC.
If installed on the roo op, modules must be installed on fireproofing material, please consult your local building depart-
ment to determine which roofing material to use.
PV module application class is A: Hazardous voltage (IEC 61730: higher than 50V DC. EN 61730: Higher than 120V), hazardous
power (higher than 240W), according to EN IEC61730-1 & -2 standards, the quality of PV modules can meet the safety
requirements and safety level II.
1.2 Application Products
This document is applicable to the series of DAH solar module as listed below:
DHP60-(XXX)-5BB DHM60-(XXX)-5BB
DHP72-(XXX)-5BB DHM72-(XXX)-5BB
01
02
/
Advertisement
Table of Contents
