Summary of Contents for DAH Solar DHP60 5BB Series
Page 1
PV Module Installation Manual Factory: No.358 Tianhe Road, Luyang Industrial Park, Hefei City, Anhui, China O ice: Floor 1-3, 6#A, Gongtou Xinglu Industrial Park, Hefei City, Anhui, China Email: sales@dh-solar.cn Tel: +86-551-65655842 www.dahsolarpv.com...
1.1 Summary 1.2 Application Products Firstly, thanks for choosing DAH Solar PV modules. In order to ensure the PV modules to be installed correctly and to have This document is applicable to the series of DAH solar module as listed below: power output stability, please read the following operation instructions carefully before installing and using.
M O D U L E I N S T A L L A T I O N M A N U A L 1.3 Warning a) When Module exposed to sunshine or other lights, it can produce DC, in this case it may cause electric shock hazard if f) PV array installation job should be operated under isolating sunlight condition, installation and maintenance also touch electrical parts.
I N S T A L L A T I O N M A N U A L 2. Installation / k) Don’t dismantle any components of DAH Solar PV module personally. 2.1 Installation Safety l) Please read and well understand all the installation instructions before Installation, connection and maintenance.
M O D U L E I N S T A L L A T I O N M A N U A L 2.2 Installation Condition 2.2.3 Angle Selection The angle of the PV modules refers to the angle between module surface and the ground (Figure 1), the output power 2.2.1 Climatic Condition will be maximum when modules are facing the sun in vertical.
Notes: 1. All mentioned clamp mounting methods here are only for reference, DAH Solar will not be responsible for the system design and installation. The mechanical loads and its safety must be operated and completed by the professional solar system installer and experienced installation team.
PV modules need to be inspected and maintenance regularly, especially during the warranty period. In order to make make the PV modules in series or parallels, which is determined by the customers’ requirements on the solar system power, sure modules reaching the excellent performance, DAH Solar adopts following maintenance measures: current, voltage etc.
Series, parallel circuit electrical diagram c) In order to reduce or avoid potential electric shock or burnt, DAH Solar suggest to do the clearness during the earlier morning or dusk with lower temperature, especially in the areas with high temperature.
The conditions of installation, operation, using and maintenance of the modules shown in this manual are beyond the controlling range of DAH Solar, lead to any personal injury or property lose during the installation, operation, using and maintenance, and any non DAH Solar product defect caused disputes, DAH Solar does not bear any legal responsibility.