Anker A2515 Manual

EN

LED Indicator

Solid blue for 3 seconds,
then off
Solid blue
Flashing blue
● For the fastest and safest charge, use the supplied Anker® charger or a charger compliant
with the Quick Charge™ 3.0 Standard (supporting 12V). Other chargers may not work well
with this device.
● Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not
recommended as it may affect the wireless charging function.

Important Safety Instructions

● Avoid dropping.
● Do not disassemble.
● Do not expose to liquids.
● For the safest and fastest charge, use original or certified cables.
●
This product is suitable for moderate climates only.
●
The maximum ambient temperature during use of this product must not exceed 40°C.
● Open flame sources, such as candles, must not be placed on this product.
● Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
Status
Connected to power
Charging mobile device
- Metal or abnormal temperature detected
- Using a non-Quick Charge™ 3.0 wall charger