Related Manuals for FARMTECH AerVator
Summary of Contents for FARMTECH AerVator
- Page 1 FARMTECH MACHINERY PTY LTD 30 MOLONEY DRV WODONGA VIC 3690 Ph. 02 60246800 Fax 02 60246844 www.farmtech.com.au...
- Page 2 TO THE OWNER Congratulations on the purchase of your new AerVator soil aerator. Your new AerVator is designed to meet your agricultural aeration requirements. The ease of operation and low maintenance will give you many trouble free hours of operation.
- Page 3 In some instances, extra front counter balancing may be required. No riders other than the tractor operator. Never allow anyone to ride on the AerVator frame at any time. Do not attempt to remove obstructions while the AerVator is in motion.
- Page 4 Waiting for “better” conditions is not necessarily a good idea, as the initial runover with an Aervator will allow the next rain or irrigation to move into the soil. Second and third workings can be planned to follow on after rain to meet aeration targets.
- Page 5 The pin can be turned 90 degrees from the solid position to sliding position. This allows each lower linkage arm to move independently so the Aervator can walk over obstructions and reduce potential for breakage. TRAILING MACHINES - Adjust top link on drawbar to level the machine for working.
- Page 6 SPARE PARTS LISTING - GH 2000 & GH 2400 ITEM DESCRIPTION GH 2000 GH 2400 PART NO PART NO Gang frame - left GFL20 GFL24 Gang frame - right GFR21 GFR25 Rotor shaft - left GRS5L GRS6L Rotor shaft - right GRS5R GRS6R Bearing...
- Page 7 SPARE PARTS LISTING - GH3000 & GH4000 ITEM DESCRIPTION GH 3000 GH 4000 PART NO PART NO Gang frame - left GFL30 GFL40 Gang frame - right GFR31 GFR41 Rotor shaft - left GRS9L GRS5L Rotor shaft - right GRS9R GRS5R Tines - left FTML...
- Page 8 SPARE PARTS LISTING - GH 5000 & GH 6000 ITEM DESCRIPTION GH 5000 GH 6000 PART NO PART NO Gang frame - left GFL24 GFL24 Gang frame - right GFR25 GFR25 Rotor shaft - left GRS6L GRS6L Rotor shaft - right GRS6R GRS6R Bearing...
-
Page 9: Spare Parts Listing
SPARE PARTS LISTING MAXI AERVATOR 8000 SERIES ITEM DESCRIPTION PART NO PER GANG Heavy gang frame - left MGFL6 Heavy gang frame - right MGFR6 Rotor shaft - left MR6L Rotor shaft - right MR6R Housing c/w dust seal H2DS... -
Page 12: Regular Maintenance
HITCHING YOUR AERVATOR TO A TRACTOR Set up the Aervator on level ground and stand on all 4 jack stands. Reverse the tractor up to the Aervator, with the lower link arms at the same height of the pick up attach points on Aervator. - Page 13 8 METRE TRAILING GROUNDHOG 3 TINE ROTOR SYSTEM - ♦ 2 X 6 rotor gang ♦ 4 x 5 rotor gang ♦ 2 x 4 rotor gang ♦ Total left tines ♦ Total right tines - ♦ Total tine bolt nuts - ♦...
- Page 15 30 MOLONEY DRIVE WODONGA VICTORIA 3690.