Table of Contents
Advertisement
ALARM MODE RECORDING
In Alarm mode a text message is sent to your mobile when the camera is activated by movement or
mains power loss. The text message tells you the camera name, the time of the alarm and which type
of alarm event occurred. When the camera records an alarm event, it stores 2 frames before, 4 frames
during and 2 frames after the event. This recording is automatically transmited to a secure server.
When the alarm trigger has been activated and the clip has been sent, the camera will wait for 30
seconds for there to be an absence of movement (in other words, for the scene to 'calm down') before
going back into alarm mode. This ensures that continuous movement does not trigger continuous alerts
and the sending of a large number of video clips.
To enable or disable alarm mode on an Iris
Camera:
1. Ensure the camera(s) and your mobile
handset are switched to ON.
2. Press in and hold the camera ON/Off switch
until the green LED illuminates, then release.
The green light becomes solid when the unit
is ON. The red PIR light will flash recognising
movement. The yellow light will begin to flash
then turn to a solid light once connection has
been made to the network and our server.
3. Go to Applications or Games folder on
your mobile handset. If this folder does
not exist on your mobile read your
handset user manual for advice.
4. Select IrisPlayer software.
Select one to launch:
IRIS
For setup and technical assistance please go to www.3rdisecure.tv or call 01443 819328
Launch
The following screen will appear.
IrisPlayer 1.03
Copyright Pedagog Limited
5. Accept Terms and Conditions by pressing 1.
License Agreement
(1) Agree (2) Disagree
I agree to use this software in accordance
with all applicable local laws governing
privacy, data protection, digital media rights
& viewing of content.
Page 7
Advertisement
Table of Contents
