Table of Contents
Advertisement
VIEWING ONLINE CAMERA IMAGES
The camera system can be used either to provide 'Online Cameras' images of the viewing location or in
'Alarm mode' when it notifies you by text message that the camera has detected movement and
automatically recorded images. The video clips are stored at a central server ready to be retrieved later.
You are still able to access the camera and see 'Online Cameras' Images when in 'Alarm mode'. If the
camera is not switched ON, pictures will not be available for viewing.
1. Connect the camera to the power adaptor and
switch on the power supply.
Figure 2
ON/OFF
SWITCH
2. Press in and hold the camera ON/OFF switch
until the GREEN LED illuminates, then release.
The green light becomes solid when the unit is
ON. The red PIR light will flash recognising
movement. The YELLOW light will begin to
flash then turn to a solid light once connection
has been made to the network and our server.
The camera is now ready to transmit data
images.
3. Go to the location of the IRISPLAYER on your
mobile phone.
Go to Applications or Games Folder or
Main Menu
4. Select the IRISPLAYER.
Select one to launch:
IRIS
For setup and technical assistance please go to www.3rdisecure.tv or call 01443 819328
Launch
The following screen will appear.
IrisPlayer 1.03
Copyright Pedagog Limited
5. Accept Terms and Conditions by pressing 1 .
License Agreement
(1) Agree (2) Disagree
I agree to use this software in accordance
with all applicable local laws governing
privacy, data protection, digital media rights
& viewing of content.
You will see this
screen when you first
access the camera.
6. Enter your pin number when prompted.
This is the number you provided at registration.
Press OK.
Security Key
****
Page 5
License Agreement
(1) Agree (2) Disagree
I agree to use this software in accordance
with all applicable local laws governing
privacy, data protection, digital media rights
& viewing of content.
You will see this
screen when you next
access the camera.
OK
Advertisement
Table of Contents
