Table of Contents
Advertisement
LAMP ACTIVATION MODE
To enable or disable the Lamp mode on the
Iris Camera:
1. Ensure the camera (s) and your mobile
handsets are switched to ON.
2. Press in and hold the camera ON/OFF switch
until the green LED illuminates, then release.
The green light becomes solid when the unit is
ON. The red PIR light will flash recognising
movement. The yellow light will begin to flash
then turn to a solid light once connection has
been made to the network and our server.
3. Go to Applications or Games folder on
your mobile handset. If this folder does
not exist on your mobile, read your
handset user manual for advice.
4. Select IrisPlayer software.
Select one to launch:
IRIS
The following screen will appear.
IrisPlayer 1.03
Copyright Pedagog Limited
For setup and technical assistance please go to www.3rdisecure.tv or call 01443 819328
Launch
5. Accept Terms and Conditions by pressing 1
License Agreement
(1) Agree (2) Disagree
I agree to use this software in accordance
with all applicable local laws governing
privacy, data protection, digital media rights
& viewing of content.
6. Enter your personalised PIN number.
Press OK.
Security Key
****
You are now presented with a list of options. . .
7. Select Connect by pressing 1 on your mobile
handset.
Main Menu
Select.....
1 Connect
2 Settings
3 About
0 Exit
Page 11
OK
Advertisement
Table of Contents
