Section 3: Basic Operation - ZeroRPM IMS2 Operator's Manual

IMS2, IMS3, IMS4, IMS5 Operator Manual

Section 3: Basic Operation

The Idle Mitigation System can be started as follows:
• When the ignition switch has been turned on, the IMS
will power on and the ZeroRPM initialization screen will
appear.
After initialization, the display will indicate the current
system status. The Start Engine message will be displayed
on the screen, verifying the engine has not been started
and is not running.
• The green State of Charge icon displays the current
percentage of charge in the lithium-iron battery pack.
• If the red battery icon is displayed at this time, the lead-
acid battery voltage has fallen below the set point. Either
start the engine to begin charging or turn off the ignition
switch.
4806-00017
3
Revision F