Section 6: Broadcasting To Intellimetrics - ZeroRPM IMS2 Operator's Manual

Table of Contents

Advertisement

IMS2, IMS3, IMS4, IMS5 Operator Manual

Section 6: Broadcasting to Intellimetrics

All data collected from the IMS is routinely transmitted
(weekly by default) to Intellimetrics, ZeroRPM's web-based
data collection portal. To force a broadcast, perform the
following steps:
Simultaneously press and hold F4 and OK.
The Broadcasting icon will be displayed above F4 within
five seconds (replacing the ZeroKEY icon if ZeroKEY is
equipped). The Broadcasting icon will remain present
while the vehicle's data is transmitted to the online portal.
The speed of the data transmission depends on the
available cellular signal.
The Broadcasting icon will briefly flash once if there is no
cellular signal.
The Broadcasting icon will disappear from the display
when the data transmission is complete. The ZeroKEY icon
will reappear above F4 if ZeroKEY is equipped.
4806-00017
®
20
Revision F

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ims3Ims4Ims5

Table of Contents