Specifying Color Space; Setting Hdmi; Reducing Noise - Eizo ColorEdge CS230B User Manual

2-8. Specifying Color Space

The color space of the input signal is specified. Set to other than "Auto" if this product cannot display correct color.
Settings
Auto
YUV4:2:2
YUV4:4:4
RGB
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Color Space" from "Screen", and press
3. Select "Auto", "YUV 4:2:2", "YUV 4:4:4", or "RGB" with
4. Press to exit.
Attention
• The setting is required when a DVI device is connected to the monitor (at the HDMI connector port) using the DVI-
HDMI conversion connector.
• Even if "Auto" is set, correct color might not be displayed.
Note
• The color space at the DVI input is converted to an RGB format.

2-9. Setting HDMI

●

Reducing Noise

The small noises that occur in dark images are reduced. Use this function to reduce noise and roughness in
images.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "HDMI Settings" from "Screen", and press
3. Choose "Noise Reduction", and press
4. Select "On" or "Off" with
5. Press to exit.
Attention
• Using the Noise Reduction function may deteriorate fine images.
32
Chapter2AdjustingScreens
Identifiesthecolorspaceoftheinputsignalautomatically.
ConvertsthecolorspaceoftheinputsignaltoaYUV4:2:2format.
ConvertsthecolorspaceoftheinputsignaltoaYUV4:4:4format.
ConvertsthecolorspaceoftheinputsignaltoanRGVformat.
or .
Function
.
.
or .
.
.
.