Fisher & Paykel OR36SDI6X1 Installation Manual page 8

Freestanding cooker
Hide thumbs Also See for OR36SDI6X1:
Table of Contents

Advertisement

Available languages

Available languages

Island trim and backguard
It is mandatory to install and use the range with either the
island trim or the optional backguard correctly in place.
The island trim is already fitted to the range while the
backguard can be purchased as a separate kit.
If replacing the island trim with the backguard, assemble it
by using the same screws/spacers used for fixing the island
trim.
Grounded outlet
The electric cord with 4-prong ground plug
(NEMA 14-50P) shall have a minimum length
of 48" (1220mm) beyond the back of the
range.
8
8
FITTING THE OPTIONAL BACKGUARD
9
LOCATION OF ELECTRICAL SUPPLY
Left side
Final position of cooker against wall
of cavity
Floor
A
SUPPLY AREA DIMENSIONS
D
A
Distance from either edge of
Range to supply area
B
Height of electrical supply area
(from floor)
C
Width of electrical supply areas
D
Depth of supply area (ie
maximum protrusion of electrical
connection from wall)
*
Depending on adjustment of feet
B
Electricity
C
A
inches (mm)
1/4" (6)
8 1/8" - 10 1/8" (207-257)
35 3/8" (899)
4 1/2" (115)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Or36sdi

Table of Contents