Download Print this page

Advertisement

Quick Links

Hanover Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
from where you purchased the product.
1-877-397-5144
Please call our Toll‐Free Customer Service Hotline at:
Between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday
www.hanover‐products.com
Or visit our website at:
To expedite any future warranty claims, please retain the Instruction Sheet, Warranty
Card and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful to never allow water to build up in frames as this will
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a
liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes
cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water
with a clean water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in
shrinkage or damage). After cleaning cushions tip on end and allow to drip dry. (Never use a
commercial or home dryer to tumble dry fabric goods). Do not use bleach or solvents to clean any
product! This will void the warranty.
For additional on‐line support on assembly, troubleshooting and care & maintenance of your outdoor
furniture, please visit our website at: www.hanover‐products.com.
6/1/2015 (b)

Advertisement

loading

Summary of Contents for Hanover BRIGDN5PCBR

  • Page 1 Do not use bleach or solvents to clean any product! This will void the warranty. For additional on‐line support on assembly, troubleshooting and care & maintenance of your outdoor furniture, please visit our website at: www.hanover‐products.com. 6/1/2015 (b)
  • Page 2 High Dining Table Owner's Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE CALL OUR CUSTOMER SERVICE HOT-LINE AT 1-877-397-5144 Between 9 A.M. - 5 P.M. Eastern Time, Monday through Friday Page 1of 7...
  • Page 3 Page 4 of 7...
  • Page 4: Parts List

    PARTS LIST PART# DESCRIPTION PICTURE Table top Table leg Support Tube Connector M6 x15mm Bolt M6 x18mm Bolt M6 x 35mm Washer Bolt Cover Wrench Page 5 of 7...
  • Page 5 Assembly Steps: Note: Do not fully tighten bolts until assembly is completed and alignment is correct. Step 1. Assemble the connector (D) to the table leg (B) with bolts (AA) and washer (DD) as shown in figure 1. Figure 1 Step 2.
  • Page 6 Step 4. Loosely attach the support tube (C) to the table leg (B) and table top (A) with bolts (CC) and washer (DD) as shown in figure 3. Step 5. Check the alignment and adjust if necessary. Once the alignment is correct, tighten all bolts with wrench (FF) .
  • Page 7 High Dining Swivel Chair Owner's Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE CALL OUR CUSTOMER SERVICE HOT-LINE AT 1-877-397-5144 Between 9 A.M. - 5 P.M. Eastern Time, Monday through Friday Page 1 of 7...
  • Page 8 PARTS LIST PART# DESCRIPTION PICTURE Chair Frame T Rocker Base Steel Panel Bolt M8 x 45mm M8 Washer M8 Spring Gasket M8 Nut M8 Bolt Cover Bolt Cover For M8 Open Wrench Page 5 of 7...
  • Page 9 Assembly Steps: Note: Do not fully tighten bolts until assembly is completed and alignment is correct. Step 1. Carefully place the chair frame (A) upside down on a non-abrasive surface. Assemble the T rocker(B) to the chair frame(A) with steel panel(D) and Bolts(AA) and Washer(BB) and M8 Spring gasket (CC) and M8 Nut(DD) by using open wrench(GG), then cover the bolts with bolt covers (EE and FF) as shown in Figure 1.
  • Page 10 Step 3. Your chair is now ready to use. (Figure 3). Figure 3 Page 7 of 7...