Unpacking Rome - Wave2wave Fiber Smart Networks ROME 500 Hardware Installation Manual

3.2

Unpacking ROME

Steps
1. Visually inspect the package to ensure it has
arrived undamaged.
2. Identify the 2 shock watch indicators on
the outside of the package and make
sure they're not activated (red). If either
indicator is red, stop the process and
contact Wave2Wave.
3. Unpack the box.
4. After the box is unpacked, inspect the
internal shock watch indicator and
all elements of the unit for damage.
If either the indicator is activated or
if there is any damage to the ROME
equipment, please do not proceed with
installation and contact Wave2Wave.
Page 10
Hardware
Installation Manual