Operation And Use Of Keyboard - EASY DRIVE ED3000 Series Use Manual

parameters of the inverter
malfunction alerting state: Malfunctions caused by external devices
or the inverter internal or operation errors, the inverter alerts relevant
malfunctions codes and block outputs.
4.1.4 Run mode
ED3000 inverter has five run modes, following is in term according
to their priorities, they are: jog run→closed-loop run→PLC run→
multisection speed run→common run. Shown as Fig.4-1
0: Jog run
Upon receiving jog run command(for instance, press the
keypad)during waiting state, the inverter run at jog frequency(see function
code P052~P054).
1: Closed-loop run
The inverter will come into closed-loop run mode when closed-loop run
control effective parameter is set(P128=1). Namely carry on PID
adjustment to specified value and feedback value and PID adjustor output
is inverter output frequency.
2: PLC run
The inverter enter into PLC run mode and run according to preset
through setting PLC effective parameter(P085=1). Can make PLC run mode
paused by multi-function terminal(function 12).
3: Multisection speed run
By nonzero combination of multi-function terminal(1、2、3 function),
choose multisection frequency 1~7 to run at multisection speed
4：Common run
Common open loop run mode of general inverter.
Above five kinds of run modes can run according to different
frequency setting except "jog run". Additionally, "PLC run"、
"Multisection speed run"、 "common run" can adjust as frequency
switching.

4.2 Operation and use of keyboard

4.2.1 Keypad layout
Keypad and control terminals can control the motor to run、change
speed 、stop、brake、set the run parameters and external devices also.
Keypad is shown as Fig.4-2 and remote keypad is shown as Fig.4-3.
key on
JOG