Table of Contents
Advertisement
Quick Links
Mighty Mite and
Super Laundry
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
An LSG Company
831 South First Street, P.O. Box 32270
Louisville, KY 40232-2270
Phone: (502) 587-1292
Sales Fax: (502) 585-3625
Service/Parts Fax: (502) 681-1275
Refer to Page 3 for Model Numbers
Presses
www.cissellmfg.com
SCR1529C
SCR1529C
Part No. AJ1031
February 2005
Advertisement
Table of Contents
Related Manuals for Cissell LDBB
Summary of Contents for Cissell LDBB
- Page 1 Mighty Mite and Super Laundry Refer to Page 3 for Model Numbers Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) An LSG Company 831 South First Street, P.O. Box 32270 Louisville, KY 40232-2270 Phone: (502) 587-1292 Sales Fax: (502) 585-3625 Service/Parts Fax: (502) 681-1275...
-
Page 3: Table Of Contents
Table of Contents © Copyright 2005, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. AJ1031 ©... - Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031...
-
Page 5: Model Identification
Model Identification Information in this manual is applicable to the following models: LDBB (CMMBB) LDCC (CMMCCY) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031... - Page 6 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031...
-
Page 7: Safety Information
Safety Information Explanation of Safety Messages Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. - Page 8 Safety Information 12. Replace worn power cords and/or loose plugs. 13. Never operate the press with any guards and/or panels removed. 14. DO NOT operate the press with missing or broken parts. 15. DO NOT bypass any safety devices. 16. Failure to install, maintain, and/or operate this press according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.
-
Page 9: Introduction
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 Introduction Parts Ordering Information If literature or replacement parts are required, contact the source from which the machine was purchased or contact Cissell at (502) 587-1292 for the name and address of the nearest authorized parts distributor. SCR1529C... - Page 10 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031...
-
Page 11: Front View – Typical Laundry Press
Front View – Typical Laundry Press Pressure Arm Right Head CLOSE Pushbutton Timer (Optional on some models) Air Filter/Regulator/Lubricator and Downstream Relieving Air Shut-Off and Lockout Valve Frame © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 Installation Front Cover... -
Page 12: Front View - Typical Laundry Collar And Cuff Press
Installation Front View – Typical Laundry Collar and Cuff Press Pressure Arm Cuff Buck Close Pushbutton Timer Control Box Air Filter/Regulator/Lubricator and Downstream Relieving Air Shut-Off and Lockout Valve © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 3 SCR548N Cover... -
Page 13: Rear View - Typical Laundry Press
Rear View – Typical Laundry Press Head Steam Outlet Buck Steam Outlet Rear Cover Anchor Bolt Holes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 Air Inlet Electrical Hook-Up (With optional timer) Steam Inlet Pressure Arm Figure 4 Installation B0158... -
Page 14: Dimensions And Specifications
Installation Dimensions and Specifications Laundry Press Net Weights Model lbs. LDCC LDBB Electrical Requirements (Presses With Timers Only) NOTE: Presses without timers do not require electric hook-up. 115 Volt, 230 Volt/60 Hertz/1 Phase, (0.50, 0.25) full load amps 110 Volt, 220 Volt/50 Hertz/1 Phase, (0.50, 0.25) full... -
Page 15: Overall Dimensions And Connecting Data
Overall Dimensions and Connecting Data 36-7/8 in. (93.7 cm) HEAD OPEN 38 in. (96.5 cm) 34 in. (86.4 cm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 1-1/2 in. TYP (3.8 cm) 53 in. (134.6 cm) HEAD OPEN HEIGHT STEAM INLET... - Page 16 Installation 1-1/2 in. (3.8 cm) Item Description Electrical Connection (for presses with timer ONLY) Air Inlet Steam Inlet Buck Steam Outlet Head Steam Outlet © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1-1/8 in. (2.9 cm) 18-1/4 in.
-
Page 17: Dimensions Of Bucks Without Padding
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT AJ1031 (16.5 cm) 13 in. 20-1/2 in. (33 cm) (52 cm) 90° LDCC COLLAR, CUFF & YOKE PRESS 30-1/2 in. (77.4 cm) LDBB BOSOM & BODY PRESS Figure 7 Installation 6-1/2 in. 10-3/4 in. (27.3 cm) SCR558N SCR558N... -
Page 18: Required Materials
Installation Required Materials NOTE: Applicable codes, ordinances, specifications and/or other governing data related to installation must be complied with. The materials listed in Table 4 MAY or MAY NOT conform to these requirements. Quantity Models with timer ONLY. Lockout type fused disconnect switch suitable for electric service connected to press (refer to wiring schematic in control box). -
Page 19: Location Requirements
Location Requirements NOTE: If a forklift is used to move press, exercise care that forklift arms are inserted under frame and DO NOT CONTACT ANY OPERATING MECHANISM. Moving press to installation location while still attached to skid is recommended. However, press can be removed from skid before moving. -
Page 20: Connecting Air Service
Installation Connecting Air Service (Refer to Figure 8) Air service connected to press must have a MINIMUM constant pressure of 80 psig (5.52 bar) and be of ample volume to meet requirements listed in data table (refer to Table 1). Air pressure should be reduced to 75 to 80 psig (5.17 to 5.52 bar) at air inlet regulator. -
Page 21: Connecting Electrical Service
Connecting Electrical Service (Presses With Timers Only) The following steps outline the procedure for connecting electric service: 1. Install a suitably sized fused disconnect switch or circuit breaker as close to press as practical. 2. Remove one knockout plug from electrical connection box. -
Page 22: Steam Check-Out
Installation Steam Check-Out Slowly open shut-off valves in steam SUPPLY and RETURN lines to prevent water hammer in steam pipes. 1. Check all steam lines for leaks. 2. Allow press to heat for 15 minutes. 3. Check head surface temperature with a pyrometer or temperature stick measuring device.
Need help?
Do you have a question about the LDBB and is the answer not in the manual?
Questions and answers