Page 1
The Fabricator has the capability di afford changes to the production and to the manual , without the onus of updating to the precedent versions of productions and manuals. CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 1di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy...
DISPATCHING ............................15 -ATTACHED.1 – SERVICE REQUEST - SUPPLIES ..............15 COMPATIBILITY CERTIFICATION TO CE MARK ..............16 WARRANTY ............................16 CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 2di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy 151116 P.I.
You an optimal support for a good using and to maintain the device characteristics unchanged in time. CHIAROSCURO SAS by Girelli Marco & C. GENERAL INFORMATIONS This users manual is an integral part of the device kit and is an essential support during the montage and during the use of this device.
It’s forbidden to remove or modify the label. In case of damaged label contact the producer. 3.1 Technical assistance and ordinary maintenance To indicate faults of device contact the Customer service: CHIAROSCURO SAS by Girelli Marco & C. C.So General A.Cantore 23 - 38068 Ala (TN) Italy. Tel: +39 0464 424715 fax: +39 0464 712027 email: info@chiaroscuro.eu...
Weight 0,830 Kg 0,620 Kg Maximum lenght of command cable < 3 m Radio control Yes, requesting CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 5di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy 151116 P.I. IT01527050221...
The articles of law EN 60335 related to the electric risks are not applied because our devices are power supplied with a very low tension system security type SELV. CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 6di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy...
6.2 Storaging Not using the device for long periods, store the device in a dry, clean place. To store for more than 24 month by the matriculation ,CHIAROSCURO SAS give the warranty expected by General Selling Conditions. CHIAROSCURO SAS di Girelli Marco & C.
High Voltage inside, derivation boxes and electrical installations. The montage has to be done by a certified Electromechanical Dealer. CHIAROSCURO SAS doesn’t have responsibilities for bad installations and/or installations done by not certified operators.
Verify that the electrical preparation and all the parameters are respected like the technical schedule at page 7 CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 9di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy 151116 P.I.
Without this shrewdness, wheels will stick around the stoppers and at the start the SLIDE.80 will recognize that block like an obstacle. The order to follow is: stopper/wheel/wheel/stopper.
For the double shutters system, if the shutters doesn’t have the same run, the automation will do the shortest run. CHIAROSCURO SAS di Girelli Marco & C. Cod. Pag. 11di 16 C.So General A.Cantore 23 - 38061 Ala (TN) Italy 151116 P.I.
If the device behavior doesn’t reflect what is reported above, don’t use the automation and contact the Customer Care service of CHIAROSCURO SAS. It’s hardly forbidden to open the case of the device except written authorizations of CHIAROSCURO SAS. Not respecting this rule will cause the immediately decay of warranty.
If the service intervention didn’t solve the problem stop all the operations and contact the Customer Care. It’s hardly forbidden to open the case of the device except written authorizations of CHIAROSCURO SAS. Not respecting this rule will cause the immediately decay of warranty.
.1 – TTACHED SERVICE REQUEST SUPPLIES For the kind attention CHIAROSCURO SAS di Girelli Marco & C. C.So General A.Cantore 23 - 38061 Ala (TN) Italy. Tel: +39 0464 424715 fax: +39 0464 712027 email: info@chiaroscuro.eu sito: www.chiaroscuro.eu...
During the period of the warranty, if the Customer want a repair done by CHIAROSCURO SAS technicians will be necessary to send a formal wrote request to CHIAROSCURO SAS.
Need help?
Do you have a question about the SLIDE.80 and is the answer not in the manual?
Questions and answers