Advertisement
member of Group
LANDING GEAR STRUTS - SUSPENSION
Landing Gear Suspension System:
Insert the bowden cable (bent on the
template) into the part (53) and secure it
with a washer (54) and carefully glue it,
then insert it into the opening at the
bottom of the part (5). Then put on a
spring of diameter 10mm and lenght
45mm from the inside. Now secure the
assembly by gluing the part (55). Test if
the suspension system is functional and
then connect the bowden cable with the
landing gear strut (49-50) – this
assembled unit will be glued to the
fuselage part (6) later.
7
Advertisement
